Product Overview
AT-cut piezoelectric quartz crystal vibrating at 10 MHz and placed between 2 gold electrodes for electrical connection. The quartz crystal surface is flat and carefully polished. The gold electrode adhesion is enhanced by using a substrate of titanium. Each sensor is preserved in a practical protective container, has single side electrode contacts and it is compatible with old openQCM and the new RF-spring contact system.
| TECH SPECS | |
|---|---|
| One side contacts | Yes |
| Quartz Frequency | 10 MHz |
| Nominal Sensitivity | 4.42 x 10 -9 g Hz-1 cm-2 |
| Frequency vs Temp stability | ± 20 KHz @ 23°C |
| Frequency Tolerance | +/- 5 KHz |
| Capacitance | 6 pF (C0) |
| Quartz Density | 0.0026497 Kg/m3 @ 25°C |
| Stiffness | 8.749 N/m2 |
| Cut | AT-fundamental |
| Cut Angle | 35° 15'± 3' |
| Quartz Thickness | ~ 160 um |
| Blank Diameter | 13.9 mm |
| Electrode Diameter | 6 mm |
| Electrode material | Gold (Au) |
| Electrode Coating | Au - Ti substrate |
| Electrode Thickness | ~ 200 nm Au (on ~10 nm Ti substrate) |
| Electrode Contacting | Single - sided contact |
| Electrical Connection | Spring contacts, Pogo-pins or HC-48/U |
| Surface appearance | Transparent |
| Cleaning | A new sensor might be contaminated. Pre-cleaning the surface will give more reproducible results |
