We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
In stock
SKU
openQCM Q-1- shield
openQCM Q-1- shield
€449.00
openQCM Q-1 shield is the brand-new and powerful electronic PCB based on network analyzer electronics, designed for more advanced applications using Quartz Crystal Microbalance Technology.
The new openQCM Q-1 electronics is mainly based on a scalar network analyzer, which is able to passively interrogate the device under test in a wide range of frequencies and analyze the transmitted signal in terms of gain and phase.
The shield uses an AD9851 DDS/DAC Synthesizer clocked at 120 MHz, which is able to generate a sine wave signal between DC and 50 MHz. The signal passing through the quartz crystal sensors is analyzed by AD8302 RF/IF Gain and Phase Detector which is able to simultaneously analyze both the gain loss and the phase delay.
NOTE: Sensor proximity electronic included. Teensy 3.6 Board not included
openQCM Q-1 shield based on network analyzer electronics - mounted and tested
The openQCM Q-1 shield is the new PCB electronics for more advanced Quartz Crystal Microbalance applications. The electronic circuit mainly consists of a network analyzer capable of passively interrogate the sensor from DC to 50 MHz and analyses both gain/loss and phase.
The shield is designed for the powerful Teensy 3.6 a 32 bit Arduino compatible development board using a 180 MHz ARM Cortex-M4 processor.
The Shield is shipped with sensor proximity electronic, that includes an extended I2C temperature sensor.
|
1-Year Extended Warranty You may purchase 1-Year Extended Warranty Service for openQCM devices. Get peace of mind knowing your system will be safer, for longer. Take this opportunity to extend or upgrade your support service for your openQCM device.
Features:
|
| Dissipation monitoring | Yes |
|---|---|
| Frequency Range | 1 MHz to 50 MHz |
| Quartz frequencies compatibility | 5 Mhz and 10 MHZ as default, but you could use other resonators in the whole frequency range |
| Hardware Compatibility | Teensy 3.6 |
| Software | Python |
| OS Compatibility | Windows, Mac, Linux |
| Data communication | USB 2.0 via Teensy 3.6 |
| Input Voltage | 5 VDC |
| Max current | 200 mA @ 5VDC |
| Total weight | 26 g |
| Length | 87 mm |
| Height | 10 mm (included board to board connectors) |
| Width | 60 mm |
| Working temperature | 0 °C - 50 °C |
Write Your Own Review