In stock
SKU
AT10-14-BIO-UP-10-SSC

10 MHZ QUARTZ SENSORS BOX FOR LIQUID BIOSENSING- 5 PIECES

€110.00

The sensor is the fundamental element  of your measurements. These AT-cut piezoelectric quartz crystals vibrating at 10 MHz are particularly suitable for liquid biosensing. The quartz crystal surface is flat and carefully polished. The gold electrode adhesion is enhanced by using a substrate of titanium.


5 sensors per package


Every sensor is preserved in a practical protective sachet, has single side electrode contacts and it is compatible with openQCM Q-1 and openQCM Wi2 devices, as well as any other device housing sensors with the same geometric dimensions

More Information
One side contacts Yes
Quartz Frequency 10 MHZ
Nominal Sensitivity 4.42 x 10 -9 g Hz-1 cm-2
Frequency vs Temp stability < +/- 5 ppm (0 to + 50 degC)
Frequency Tolerance ± 20 KHz @ 23°C
Capacitance typ. 8 pF (C0)
Quartz Density 0.0026497 Kg/m3 @ 25°C
Stiffness 8.749 N/m2
Cut AT
Cut Angle 35° 15'± 3'
Quartz Thickness ~ 160 um
Blank Diameter 14mm
Front electrode diameter 12.0 mm
Back electrode diameter 6.0 mm
Electrode material Gold (Au)
Electrode Coating Au - Ti substrate
Electrode Thickness ~ 200 nm Au (on ~10 nm Ti substrate)
Electrical Connection Pogo-pins of HC-48/U
Surface appearance Transparent
Cleaning A new sensor might be contaminated. Pre-cleaning the surface will give more reproducible results
Write Your Own Review
You're reviewing:10 MHZ QUARTZ SENSORS BOX FOR LIQUID BIOSENSING- 5 PIECES
To Top